43"W x 36"H x 24"L Blue M DCC-1406-B-MP550 Inert Gas Clean Room Cabinet Oven, 662°F, 208V Single Phase

Single door with 2 cam action positive seal latches and silicone rubber gasket. Stainless steel interior with 5 shelf brackets on 6" centers, no shelves are supplied with the oven. A HEPA filter is installed in the right-side wall and removes contaminants in the air flow. Coiled style heating elements and direct drive circulating fan are located under the floor. Heated air is circulated in a horizontal pattern across the chamber. A finned cooling coil is also located under the floor to provide more rapid cooling if required. A chamber vent port 1/2" NPT located on top of the oven to vent out moisture and contaminants while Nitrogen gas is introduced into the chamber.

Controls are located in a slide out console located directly under the work chamber. A Blue M PRO550 digital programmable temperature controller, a Yokogawa UT 150L digital high limit control and chamber power control switch with indicating light are flush mounted in the face of the console. A circuit breaker disconnect switch is mounted on the front panel - right side. A flow meter (0-600CFH) for Nitrogen atmosphere is located on the left-hand side. A separate selector switch for the cooling activates the solenoid to allow water to flow through the cooling coil.